frankiepoon wrote:
Raymond Wan wrote:
Gundam wrote:
Raymond Wan wrote:
frankiepoon wrote:
Raymond Wan wrote:
frankiepoon wrote:
RCHK wrote:
frankiepoon wrote:

just remind, Gen 8 唔輕, 估有八磅重, 個原箱 size 有呎半立方
記得之前有人係日本hand carry拎N54L返來香港

Hand Carry ?
Can it pass through the maximum allowable size ?
Did he/she remove the packaging and just bring the N54L unit ?

唔知wor, 總知佢原盒拎返來

Cabin baggage should have a maximum length of 56 cm (22 inches), width of 45 cm (18 inches) and depth of 25 cm (10 inches)
Anyone knows the actual size of the box packaging of Gen 8 G1610T ?
Gen 8 (Server Size)
Height 23.25 cm (9.15 in)
Depth 24.50 cm (9.65 in)
Width 23.00 cm (9.06 in)
Weight, minimum 7.40 kg (16.31 lb)
Is it the box same as G7 N54L ?

I measured mine :
37cm(D) x 34cm(W) x 34cm(H)
Same depth, around one inch wider but 2.5 inches shorter than the box of N54L
Gundam hing, thanks.
Hence, the N54L or Gen 8 is not able to be hand-carried due to oversize of the box.
However, if you can remove the box and just bring the Microserver, then it may be carried into the cabin for some airlines.
The normal weight allowance for hand-carry luggage is around 5-10kg for most international airlines.
It is better to arrange the HP Microserver for check-in luggage.

有圖有真相
http://www.hkepc.com/forum/redirect.php ... d=29879380" onclick="window.open(this.href);return false;
其實一d都唔辛苦...我由酒店去機場, 全程都係推唔使點搬...手提上機, 行李架岩岩fit位.
Product Dimensions: 14.8 x 12.5 x 15.5 inches ; 17.5 pounds
Shipping Weight: 17.6 pounds

Gen8 Microserver (Boxed)
37cm(H) x 34cm(W) x
34cm(D)
Gen8 Microserver (Un-Boxed)
23cm(H) x 23cm(W) x 25cm(D)
Allowable Cabin Luggage Size
56cm(L) x 45cm(W) x
25cm(D)
If the Gen8 with box, the Depth (34cm) may be exceed the allowable (25cm) by 9cm
If the Gen8 without box, it is OK to pass through as hand carry luggage
However, if the airline staff does not check the size details, the boxed Gen8 may be OK as it may just fit the overhead compartment
Otherwise, just un-box it before board the air-craft
