Page 25 of 31
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sat Jun 13, 2015 11:44 pm
by mcnelson
現時因發現,原來自己真係on099
加ram裝ESXI再裝黑群.可usb引導sata5.但config好難搞
退ram返淘寶用回2G ram,裝WS2012R2再裝黑群.但未搞掂usb引導sata5.插入任何HDD或RAID Card 上HDD即不能進入WS2012R2.
E+只裝黑群.可能浪費唔一早直接買synology 4bay
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 11:15 am
by mcnelson
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 11:53 am
by frankiepoon
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 12:03 pm
by yawoo
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 1:41 pm
by mcnelson
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 3:33 pm
by frankiepoon
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
類似普通BIOS畫面，唔係smart utility
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 7:03 pm
by halowai
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 9:57 pm
by mcnelson
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Sun Jun 14, 2015 11:09 pm
by yawoo
mcnelson wrote:
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
其實你而家個底係裝黑群定2012? 黑群都無P410 driver, 應該唔可以直認RAID disk.
個底裝2012, 再行黑群VM. 個RAID disk assign比2012用, 再生vhd disk file比VM用.
又或者2012好似可passthrough成隻logical disk比VM用 (類似ESXi RDM passthrough)
Re: [長期集中討論] HP Microserver Gen8 討論
Posted: Mon Jun 15, 2015 9:46 am
by frankiepoon
yawoo wrote:
mcnelson wrote:
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
其實你而家個底係裝黑群定2012? 黑群都無P410 driver, 應該唔可以直認RAID disk.
個底裝2012, 再行黑群VM. 個RAID disk assign比2012用, 再生vhd disk file比VM用.
又或者2012好似可passthrough成隻logical disk比VM用 (類似ESXi RDM passthrough)
咁辛苦為咩, 直接買syno好過啦
