[長期集中討論] HP Microserver Gen8 討論

mcnelson · Post by **mcnelson** » Mon Jun 15, 2015 10:08 am

frankiepoon wrote:
yawoo wrote:
mcnelson wrote:
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
frankiepoon wrote:
frankiepoon wrote: 裝左張卡, 但點解冇得揀config
onboard SATA揀左legacy mode~
原來要自己按F8
http://h20564.www2.hp.com/hpsc/doc/publ ... -c02637073" onclick="window.open(this.href);return false;
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
其實你而家個底係裝黑群定2012? 黑群都無P410 driver, 應該唔可以直認RAID disk.
個底裝2012, 再行黑群VM. 個RAID disk assign比2012用, 再生vhd disk file比VM用.
又或者2012好似可passthrough成隻logical disk比VM用 (類似ESXi RDM passthrough)
咁辛苦為咩, 直接買syno好過啦

就係自己奶嘢，至上網睇返。
好多奶嘢文。
wolfriya.blogspot.hk/2015/03/hp-proliant-microserver-gen8-Eddie.html

RCHK · Post by **RCHK** » Mon Jun 15, 2015 10:13 am

mcnelson wrote:
frankiepoon wrote:
yawoo wrote:
mcnelson wrote:
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
frankiepoon wrote:
frankiepoon wrote: 裝左張卡, 但點解冇得揀config
onboard SATA揀左legacy mode~
原來要自己按F8
http://h20564.www2.hp.com/hpsc/doc/publ ... -c02637073" onclick="window.open(this.href);return false;
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
其實你而家個底係裝黑群定2012? 黑群都無P410 driver, 應該唔可以直認RAID disk.
個底裝2012, 再行黑群VM. 個RAID disk assign比2012用, 再生vhd disk file比VM用.
又或者2012好似可passthrough成隻logical disk比VM用 (類似ESXi RDM passthrough)
咁辛苦為咩, 直接買syno好過啦
就係自己奶嘢，至上網睇返。
好多奶嘢文。
wolfriya.blogspot.hk/2015/03/hp-proliant-microserver-gen8-Eddie.html

研究下 http://www.nas4free.org/" onclick="window.open(this.href);return false;
行 ZFS software RAID, 洗鬼用 DSM

mcnelson · Post by **mcnelson** » Wed Jun 17, 2015 5:04 pm

RCHK wrote:
mcnelson wrote:
frankiepoon wrote:
yawoo wrote:
mcnelson wrote:
halowai wrote:
mcnelson wrote:
yawoo wrote:
frankiepoon wrote:
mcnelson wrote:
frankiepoon wrote:
frankiepoon wrote: 裝左張卡, 但點解冇得揀config
onboard SATA揀左legacy mode~
原來要自己按F8
http://h20564.www2.hp.com/hpsc/doc/publ ... -c02637073" onclick="window.open(this.href);return false;
Hi frankiepoon
張P410可唔可以入到win2012先至config raid.
No!
我未玩過gen8+p410
開機無得入p410 個bios config?
W2012 唔可以裝返p410 driver + hp smart array utility 去做config?
如果用SATA 5 起OS, 可以安左OS先再CONFIG RAID
用PROVISIONING, 揀返2012 , 之後準備定2012(在USB) , 佢會INSTALL 好DRIVER +SYSTEM,
REBOOT 完就入到2012, 之後係桌面有個SHORTCUT (HP Management) , 按入去可以CONFIG RAID
因我本身9成會只用黑群，
之前都有師兄提示，入到黑群㸃可以入到P410先至係問題。
如果P410在lP config好個raid當然入2012可以見到及用到。
但就黑群用唔到唔通要用返低板SAS。
其實你而家個底係裝黑群定2012? 黑群都無P410 driver, 應該唔可以直認RAID disk.
個底裝2012, 再行黑群VM. 個RAID disk assign比2012用, 再生vhd disk file比VM用.
又或者2012好似可passthrough成隻logical disk比VM用 (類似ESXi RDM passthrough)
咁辛苦為咩, 直接買syno好過啦
就係自己奶嘢，至上網睇返。
好多奶嘢文。
wolfriya.blogspot.hk/2015/03/hp-proliant-microserver-gen8-Eddie.html
研究下 http://www.nas4free.org/" onclick="window.open(this.href);return false;
行 ZFS software RAID, 洗鬼用 DSM

因為用開synology介面及apps
唔駛再重新學。

yawoo · Post by **yawoo** » Sat Jun 20, 2015 12:20 pm

昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)

yawoo · Post by **yawoo** » Sat Jun 20, 2015 1:19 pm

frankiepoon wrote: iLo Advance開心版
https://thepiratebay.se/torrent/8898913 ... nt_Keygen_(For_Adv_iLo" onclick="window.open(this.href);return false;)

我找過ilo keygen, virustotal 都報有病的，用唔過
昨晚試過ilo 2 advanced key 都一樣入到ilo 4. 上網找找，就有key code 了

frankiepoon · Post by **frankiepoon** » Sat Jun 20, 2015 9:27 pm

yawoo wrote: 昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)

一開始15%，之後升上50呀？

yawoo · Post by **yawoo** » Sat Jun 20, 2015 9:39 pm

frankiepoon wrote:
yawoo wrote: 昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)
一開始15%，之後升上50呀？

開機50%, 之後15%

frankiepoon · Post by **frankiepoon** » Sat Jun 20, 2015 11:58 pm

yawoo wrote:
frankiepoon wrote:
yawoo wrote: 昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)
一開始15%，之後升上50呀？
開機50%, 之後15%

咁低都嘈

yawoo · Post by **yawoo** » Mon Jun 22, 2015 12:19 am

frankiepoon wrote:
yawoo wrote:
frankiepoon wrote:
yawoo wrote: 昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)
一開始15%，之後升上50呀？
開機50%, 之後15%
咁低都嘈

其實我想放係廳到, 扮埋router.
無開冷氣28%, 開左冷氣15%. 但其實分別唔大, 算嘈.
暫時唔見會reboot, 運行正常.

frankiepoon · Post by **frankiepoon** » Mon Jun 22, 2015 10:06 am

yawoo wrote:
frankiepoon wrote:
yawoo wrote:
frankiepoon wrote:
yawoo wrote: 昨晚裝左個2008試機
行Ahci mode, 風扇15%, 都仍覺幾大聲
遲d 再試raid0單碟，睇下静幾多
但行raid0, hdd又sleep唔到. 同hdd唔知可否其他機直讀
插左張TB hynix 8GB, 博一博會否auto-boot (個TB 賣家係有好多成交)
一開始15%，之後升上50呀？
開機50%, 之後15%
咁低都嘈
其實我想放係廳到, 扮埋router.
無開冷氣28%, 開左冷氣15%. 但其實分別唔大, 算嘈.
暫時唔見會reboot, 運行正常.

我都係擺係廳, 裝晒5隻HDD都唔嘈wor, 你要求太高?

on099.com

[長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論

Re: [長期集中討論] HP Microserver Gen8 討論