on099.com

Code: Select all

380.57 (24-Dec-2015)
    - NEW: Merged with 380_1031 GPL
    - NEW: Added RT-AC3100 and RT-AC5300 support
    - NEW: Added RT-AC68U HW Revision C1 support
    - NEW: Backup/Restore of the content of the JFFS
           partition (under Administration Restore/Save Settings)
    - NEW: Added DNSSEC support.  Can be enabled under LAN -> DHCP.
    - NEW: Added custom/postconf support for igmpproxy.conf.
    - CHANGED: Increased user account limit from 16 to 32 on
               the VPN server pages.
    - CHANGED: Updated e2fsprogs to 1.42.13
    - CHANGED: Increased maximum entries in Parental Control
               (time scheduler) to 32.
    - CHANGED: Updated miniupnpd to 1.9.20151119.
    - CHANGED: Updated Openssl to 1.0.2e.
    - CHANGED: Downgraded Dropbear to 2014.66, too many issues in
               the newer releases.
    - CHANGED: Improvements to VPN Status page
    - FIXED: CTF not automatically disabled when enabling IPTraffic.
    - FIXED: Openvpn clients 3 through 5 were all run on the first
             CPU core.  They are now properly alternated like the
             first two (odd on CPU1, even on CPU0)
    - FIXED: smb.log generated by networkmap could fill up RAM
    - FIXED: upnpc_xml.log generated by miniupnpc could fill up RAM
    - FIXED: Inconsistant names used on IPTraffic and Sysinfo page.
             Now, we give priority to any description manually entered
             on the networkmap, followed by static hostname, then any
             current (lease) hostname.
   - FIXED: MAC queries sent to the OUI database were broken due to
            changes on the IEEE website
   - FIXED: Applying changes to OpenVPN client page would start the
            client even if it was disabled/stopped.

Code: Select all

380.58 (xx-xxx-2016)
    - NEW: Merged with 380_1354 GPL
    - NEW: Added Tweaks and Hacks settings to Tools -> Other Settings.
           These are UNSUPPORTED tweaks, intended mostly for 
           experimentation, or very specific situations.  If unsure how
           to apply these, manually reboot after changing them.
    - NEW: Added setting to configure OpenVPN's auth digest algo.
    - NEW: Added setting to configure OpenVPN's logging verbosity.
           Note that this setting is global to all clients/servers.
    - CHANGED: Updated OpenVPN to 2.3.10
    - CHANGED: Updated openssl to 1.0.2g
    - CHANGED: Updated miniupnpd to 1.9.20160222
    - CHANGED: Updated udpxy to 1.0-build 23-10 (backport from GPL 
               380_2345)
    - CHANGED: if you set an OpenVPN client DNS mode to "Exclusive"
               and you enable policy-based routing, then those policies
               will also determine which DNS to use (the tunnel's or
               the ISP's).  This is based on DNSFilter's technology.
               You no longer need to use DNSFilter to control
               the DNS used by your OpenVPN clients.
    - CHANGED: Made OpenVPN traffic bypass CTF, which resolves
               some throughput issues with it
    - CHANGED: Disabled X11 Forwarding support in Dropbear,
               for security.
    - FIXED: PPTP static route handling script was broken
    - FIXED: minidlna would check for the wrong database filename
             at start time
    - FIXED: Wrong status shown for VPN Client 3
    - FIXED: OpenVPN clients were run on the wrong CPU cores.
             Now, odd instances correctly run on the second core.
    - FIXED: Using DNSFilter with default mode set to "router" would
             prevent using the router for IPv6 lookups.
    - FIXED: Account limit wasn't properly allowing up to 10 
             clients for SMB/FTP (patch by vit9696)
    - FIXED: Having multiple OpenVPN clients configured with
             multiple "Accept DNS configuration" modes would
             only apply the last client's setting.  Now, we
             apply the most restrictive setting of all
             configured clients.
    - FIXED: RT-AC68U 2.4 GHz was broken if CTF was disabled
             (downgraded wifi driver to  6.37.14.105)
    - FIXED: Diasbling the SIP NAT helper would also drop all port 5060 
             traffic.  Some users need to keep the SIP helper disabled 
             with their SIP client.  Reverted that GPL 858 change.

Code: Select all

- NEW: Merged with 380_2697 GPL.  This includes beta MU-MIMO support for 
           the RT-AC87U/AC88U/AC3100/AC5300, and IPTV fixes.
    - NEW: Option on OpenVPN client/server page to reset them back to the 
           factory default settings.
    - EXPERIMENTAL: Added support for codel and fq_codel to ARM models
                    (RT-AC56U and newer).

                    When enabling Traditional QoS or Bandwidth Limiter,
                    you can now change from the default sfq queue 
                    discipline to codel or fq_codel.
                    (based on Kyle Sanderson's Tomato backport)

                    NOTE: Traditional QoS is currently broken on the
                          newer models (RT-AC88U and up).  This is a known
                          issue in recent Asus releases.

    - CHANGED: WAN -> NAT Passthrough now allows you to determine whether or 
               not to load the NAT helper module for h323, rtsp and sip.  
               Asus's old behaviour is "Enabled + NAT Helper".
    - CHANGED: DNSFilter client dropdown now uses Asus's new one integrated 
               with networkmap.
    - CHANGED: minidlna now supports refreshing an existing database, so the 
               Tweak setting was updated accordingly
    - CHANGED: Enable SPNEGO support in Samba
    - CHANGED: Integrated Asus's networkmap into the DHCP reservations page
    - CHANGED: Updated Tor to 0.2.7.6
    - CHANGED: SSH WAN access will also work over IPv6
    - CHANGED: Updated miniupnpd to 2.0
    - CHANGED: Fields on the DHCP static lease page are now sortable
               (original patch by Allan Jensen)
    - FIXED: Daily/Monthly traffic monitoring shows invalid values on the 
             RT-AC88U/3100/5300, even with CTF disabled.  Implemented a 
             temporary workaround.
    - FIXED: WPS wasn't working on the RT-AC3200
    - FIXED: Backported security fixes from OpenWRT to Samba 3.6.25, 
             addressing the following: 
             CVE-2015-5252, CVE-2015-5370, CVE-2015-5296, 
             CVE-2015-5299, CVE-2015-7560, CVE-2016-2110, 
             CVE-2016-2111, CVE-2016-2112, CVE-2016-2115, 
             CVE-2016-2118.
   - FIXED: OpenVPN clients set to policy-based routing and Exclusive
            DNS mode were still adding the tunnel nameservers to 
            dnsmasq, causing both routed and non-routed clients to use 
            them.