[長期集中討論] HP Microserver Gen8 討論

歡迎開開心心齊吹水
Post Reply
User avatar
Gundam
Posts: 1096
Joined: Mon Oct 27, 2014 8:46 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by Gundam »

Raymond Wan wrote:
frankiepoon wrote:
andyyau wrote: 用乜鬼raid呀,raid有事上來,reapair及backup都搞到你傻。
我隻5bay syno就係因為轉harddisk,個raid5x5 hdd搞左2-3日。
仲要幾隻大hard disk做臨時storage。

所以之後打死都唔再用raid,因為可以一隻一隻獨立處理,
有事只要搞一隻,都唔知幾方便。
我N54L用3Tx2 Raid0 做BT+FTP, 方便唔使轉HDD, 同埋內部Copy 2xxMB/s ;;)
你係咪想換Gen8? 我部Gen8可能好快放售 :))
:onion111: :onion111: :onion111:

N54L is easier to setup and control than Gen 8

or

N54L is more user friendly than Gen 8

:onion35: :onion35: :onion35:
Just bought one Gen 8 with the P222 RAID card in my office and testing the installation steps.

I would say, besides CPU speed :

For standard OS (Windows, ESX, Linux etc) and standard hardware, Gen 8 is much easier to setup because it can be installed through HP's Intelligent Provisioning. It's the advanced version of SmartStart and you can install a standard OS in a fast and dummy way, together with all necessary HP drivers and management tools.

But if you want to PLAY with the server, say installing Synology OS, or trying to boot from specific HDD (not the default first HDD), or having Hot-Plug support, or trying to add extra HDDs/SSDs etc... N54L/N40L is much more flexible because the modified BIOS is incredible....
User avatar
frankiepoon
Posts: 1634
Joined: Sat Nov 01, 2014 12:19 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by frankiepoon »

Gundam wrote:
Raymond Wan wrote:
frankiepoon wrote:
andyyau wrote: 用乜鬼raid呀,raid有事上來,reapair及backup都搞到你傻。
我隻5bay syno就係因為轉harddisk,個raid5x5 hdd搞左2-3日。
仲要幾隻大hard disk做臨時storage。

所以之後打死都唔再用raid,因為可以一隻一隻獨立處理,
有事只要搞一隻,都唔知幾方便。
我N54L用3Tx2 Raid0 做BT+FTP, 方便唔使轉HDD, 同埋內部Copy 2xxMB/s ;;)
你係咪想換Gen8? 我部Gen8可能好快放售 :))
:onion111: :onion111: :onion111:

N54L is easier to setup and control than Gen 8

or

N54L is more user friendly than Gen 8

:onion35: :onion35: :onion35:
Just bought one Gen 8 with the P222 RAID card in my office and testing the installation steps.

I would say, besides CPU speed :

For standard OS (Windows, ESX, Linux etc) and standard hardware, Gen 8 is much easier to setup because it can be installed through HP's Intelligent Provisioning. It's the advanced version of SmartStart and you can install a standard OS in a fast and dummy way, together with all necessary HP drivers and management tools.

But if you want to PLAY with the server, say installing Synology OS, or trying to boot from specific HDD (not the default first HDD), or having Hot-Plug support, or trying to add extra HDDs/SSDs etc... N54L/N40L is much more flexible because the modified BIOS is incredible....
Intelligent Provisioning裝windows要用碟 ~x(
User avatar
Gundam
Posts: 1096
Joined: Mon Oct 27, 2014 8:46 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by Gundam »

frankiepoon wrote:
Gundam wrote:
Raymond Wan wrote:
frankiepoon wrote:
andyyau wrote: 用乜鬼raid呀,raid有事上來,reapair及backup都搞到你傻。
我隻5bay syno就係因為轉harddisk,個raid5x5 hdd搞左2-3日。
仲要幾隻大hard disk做臨時storage。

所以之後打死都唔再用raid,因為可以一隻一隻獨立處理,
有事只要搞一隻,都唔知幾方便。
我N54L用3Tx2 Raid0 做BT+FTP, 方便唔使轉HDD, 同埋內部Copy 2xxMB/s ;;)
你係咪想換Gen8? 我部Gen8可能好快放售 :))
:onion111: :onion111: :onion111:

N54L is easier to setup and control than Gen 8

or

N54L is more user friendly than Gen 8

:onion35: :onion35: :onion35:
Just bought one Gen 8 with the P222 RAID card in my office and testing the installation steps.

I would say, besides CPU speed :

For standard OS (Windows, ESX, Linux etc) and standard hardware, Gen 8 is much easier to setup because it can be installed through HP's Intelligent Provisioning. It's the advanced version of SmartStart and you can install a standard OS in a fast and dummy way, together with all necessary HP drivers and management tools.

But if you want to PLAY with the server, say installing Synology OS, or trying to boot from specific HDD (not the default first HDD), or having Hot-Plug support, or trying to add extra HDDs/SSDs etc... N54L/N40L is much more flexible because the modified BIOS is incredible....
Intelligent Provisioning裝windows要用碟 ~x(
可以用usb, ftp, smb都得

Use rufus to create bootable usb from windows server iso :
https://rufus.akeo.ie/?locale=zh_TW" onclick="window.open(this.href);return false;
User avatar
frankiepoon
Posts: 1634
Joined: Sat Nov 01, 2014 12:19 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by frankiepoon »

Gundam wrote:
frankiepoon wrote:
Gundam wrote:
Raymond Wan wrote:
frankiepoon wrote:
andyyau wrote: 用乜鬼raid呀,raid有事上來,reapair及backup都搞到你傻。
我隻5bay syno就係因為轉harddisk,個raid5x5 hdd搞左2-3日。
仲要幾隻大hard disk做臨時storage。

所以之後打死都唔再用raid,因為可以一隻一隻獨立處理,
有事只要搞一隻,都唔知幾方便。
我N54L用3Tx2 Raid0 做BT+FTP, 方便唔使轉HDD, 同埋內部Copy 2xxMB/s ;;)
你係咪想換Gen8? 我部Gen8可能好快放售 :))
:onion111: :onion111: :onion111:

N54L is easier to setup and control than Gen 8

or

N54L is more user friendly than Gen 8

:onion35: :onion35: :onion35:
Just bought one Gen 8 with the P222 RAID card in my office and testing the installation steps.

I would say, besides CPU speed :

For standard OS (Windows, ESX, Linux etc) and standard hardware, Gen 8 is much easier to setup because it can be installed through HP's Intelligent Provisioning. It's the advanced version of SmartStart and you can install a standard OS in a fast and dummy way, together with all necessary HP drivers and management tools.

But if you want to PLAY with the server, say installing Synology OS, or trying to boot from specific HDD (not the default first HDD), or having Hot-Plug support, or trying to add extra HDDs/SSDs etc... N54L/N40L is much more flexible because the modified BIOS is incredible....
Intelligent Provisioning裝windows要用碟 ~x(
可以用usb, ftp, smb都得

Use rufus to create bootable usb from windows server iso :
https://rufus.akeo.ie/?locale=zh_TW" onclick="window.open(this.href);return false;
講緊windows 7 :-q
User avatar
韋信
Posts: 2006
Joined: Thu Oct 23, 2014 10:54 pm
Location: 唔比著黃衫踢波既球場
Contact:

Re: [長期集中討論] HP Microserver Gen8 討論

Post by 韋信 »

知唔知邊處有佢果條 mini sas to sata cable
User avatar
Gundam
Posts: 1096
Joined: Mon Oct 27, 2014 8:46 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by Gundam »

韋信 wrote: 知唔知邊處有佢果條 mini sas to sata cable
This one ?

http://item.taobao.com/item.htm?spm=a23 ... tive_new=1" onclick="window.open(this.href);return false;
User avatar
wmmokk
Posts: 781
Joined: Wed Oct 29, 2014 4:04 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by wmmokk »

韋信 wrote: 知唔知邊處有佢果條 mini sas to sata cable
http://www.zodiac.com.hk/products.html? ... UCfAZNrq0c" onclick="window.open(this.href);return false;
User avatar
韋信
Posts: 2006
Joined: Thu Oct 23, 2014 10:54 pm
Location: 唔比著黃衫踢波既球場
Contact:

Re: [長期集中討論] HP Microserver Gen8 討論

Post by 韋信 »

Gundam wrote:
韋信 wrote: 知唔知邊處有佢果條 mini sas to sata cable
This one ?

http://item.taobao.com/item.htm?spm=a23 ... tive_new=1" onclick="window.open(this.href);return false;
係,但個樣有啲 8-x
User avatar
韋信
Posts: 2006
Joined: Thu Oct 23, 2014 10:54 pm
Location: 唔比著黃衫踢波既球場
Contact:

Re: [長期集中討論] HP Microserver Gen8 討論

Post by 韋信 »

wmmokk wrote:
韋信 wrote: 知唔知邊處有佢果條 mini sas to sata cable
http://www.zodiac.com.hk/products.html? ... UCfAZNrq0c" onclick="window.open(this.href);return false;
網友喺隔離返工,中午可以過去買。
User avatar
frankiepoon
Posts: 1634
Joined: Sat Nov 01, 2014 12:19 pm

Re: [長期集中討論] HP Microserver Gen8 討論

Post by frankiepoon »

今日先得閒再試機, Intel粒U係唔同d :-bd

N54L
n54l_bt_cpu.jpg
Gen8
gen8_bt_cpu.jpg
You do not have the required permissions to view the files attached to this post.
Post Reply