Asus RT-AC68U

[frankiepoon]

Merlin firmware 最近版本已無乜作為。漏洞fix得比華碩仲慢。
華碩出到384，fix多幾個漏洞, 佢地仲只有380, 382仲beta緊。

Asus最新版有埋AiMesh了。
Merlin穩定性亦差。試過update左後，竟有有個button會無反應。
要reset setting至好返，真廢。

而且個68U既GUI, 比俄仔個56U版本慢太多太多太多了。

另外係每次改Setting, 56U一秒多d，68U半分鐘都唔知得未。廢廢廢廢廢！

剛update左asus新版, 玩下先
https://www.asus.com/hk/Networking/RTAC ... Desk_BIOS/" onclick="window.open(this.href);return false;

新版用唔到VPN, SMB又有少問題, 都係用返merlin算
唔通要reset一次先得

VPN/PPTP 用緊，無問題。你改改Windows VPN client既setting睇睇。
我Mac，Windows及Android都無事。

就係Android VPN有問題

[andyyau]

Merlin firmware 最近版本已無乜作為。漏洞fix得比華碩仲慢。
華碩出到384，fix多幾個漏洞, 佢地仲只有380, 382仲beta緊。

Asus最新版有埋AiMesh了。
Merlin穩定性亦差。試過update左後，竟有有個button會無反應。
要reset setting至好返，真廢。

而且個68U既GUI, 比俄仔個56U版本慢太多太多太多了。

另外係每次改Setting, 56U一秒多d，68U半分鐘都唔知得未。廢廢廢廢廢！

剛update左asus新版, 玩下先
https://www.asus.com/hk/Networking/RTAC ... Desk_BIOS/" onclick="window.open(this.href);return false;

新版用唔到VPN, SMB又有少問題, 都係用返merlin算
唔通要reset一次先得

VPN/PPTP 用緊，無問題。你改改Windows VPN client既setting睇睇。
我Mac，Windows及Android都無事。

就係Android VPN有問題

可能系DNS問題，你試試加個8.8.8.8入手機VPN設定

[frankiepoon]

Merlin firmware 最近版本已無乜作為。漏洞fix得比華碩仲慢。
華碩出到384，fix多幾個漏洞, 佢地仲只有380, 382仲beta緊。

Asus最新版有埋AiMesh了。
Merlin穩定性亦差。試過update左後，竟有有個button會無反應。
要reset setting至好返，真廢。

而且個68U既GUI, 比俄仔個56U版本慢太多太多太多了。

另外係每次改Setting, 56U一秒多d，68U半分鐘都唔知得未。廢廢廢廢廢！

剛update左asus新版, 玩下先
https://www.asus.com/hk/Networking/RTAC ... Desk_BIOS/" onclick="window.open(this.href);return false;

新版用唔到VPN, SMB又有少問題, 都係用返merlin算
唔通要reset一次先得

VPN/PPTP 用緊，無問題。你改改Windows VPN client既setting睇睇。
我Mac，Windows及Android都無事。

就係Android VPN有問題

可能系DNS問題，你試試加個8.8.8.8入手機VPN設定

轉左舊版merlin算啦, 廢事煩
反正官方新版又無咩特別

[RCHK]

384.3 Beta
No AiMesh

Code: Select all

- NOTE: To reduce confusion following the version
           bump to 384, the current Github repository
           was renamed from asuswrt-merlin.382 to
           asuswrt-merlin.ng (for New Generation).
           It's recommended that you update your
           local repository if you're a developer,
           for example by running:

              git remote set-url origin \
                 [email protected]:RMerl/asuswrt-merlin.ng.git

   - NOTE: AiMesh is currently not supported.  Feasability of
           supporting it is still under evaluation.
   - NEW: Merged with GPL 384_10007
   - NEW: Added support for RT-AC3200 (merged
          SDK 7.x-main + binary blobs from 382_19466).
   - NEW: nano can now be configured through /jffs/configs/nanorc
   - CHANGED: Allow up to 5 OpenVPN clients on RT-AC3200.
   - CHANGED: Updated nano to 2.9.3.
   - FIXED: Some routers coming from 380.xx would incorrectly
            report a new firmware available at boot time.
   - FIXED: Some broken clients (like Samsung TVs) try to use
            reserved hostnames - ignore these.  (theMIRon)
   - FIXED: Added missing IPv6 local hostnames (theMIRon)
   - FIXED: Issues withh DNS & broadcast relay for pptp
            clients (theMIRon)
   - FIXED: Fixed CVE-2018-5721 in httpd (Merlin & theMIROn)
   - FIXED: helper.js wasn't properly handling parentheses
            (John9527)
   - FIXED: NAT acceleration of PPPoE for some models (fix
            backported from 382_50010)
   - FIXED: Networkmap-related issues on some models (missing
            tx/rx rate and such).
   - FIXED: ipset could cause the router to crash on the HND
            platform (john9527)

[RCHK]

384.4 Beta

RT-AC86U IPSec VPN support

Code: Select all

   - NEW: Merged with GPL 384_20379 (with some binary components
          from 382_50010 and 384_20308 depending on models)
   - NEW: Added support for the RT-AC5300.
   - NEW: Added support for the RT-AC87U.
   - NEW: Added IPSEC support to the RT-AC86U.
   - CHANGED: Tightened security around some config files.
   - CHANGED: Allow guest networks settings for AP isolation
              and SSID broadcast to be set separately from
              their parent interface (John Bacho)
   - CHANGED: Samba protocol support can now be set to
              SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default).
              This will result in a performance drop on all
              models but the RT-AC86U, but will be more secure.
              Ideally, people should change it to SMBv2 only,
              and then reboot all their client devices to start
              using only the new protocol.
   - FIXED: Resetting an OpenVPN client to default settings
            might revert back after a reboot.
   - FIXED: log flood from lldpd about "unable to send packet
            on real device" (moved to debug level)
   - REMOVED: Telnet server.  Please use SSH for console-based
              management.
   - REMOVED: Disabled SNMP support on the RT-AC86U (incompatible)

[frankiepoon]

前排農曆新年假終於裝左AC86U來用, 感覺同AC68U無咩分別

[RCHK]

前排農曆新年假終於裝左AC86U來用, 感覺同AC68U無咩分別

https://www.snbforums.com/threads/ac68u ... ing.43055/" onclick="window.open(this.href);return false;
86U is better in 5G WiFi.

[andyyau]

前排農曆新年假終於裝左AC86U來用, 感覺同AC68U無咩分別

https://www.snbforums.com/threads/ac68u ... ing.43055/" onclick="window.open(this.href);return false;
86U is better in 5G WiFi.

我轉角位既睡房, 實測同N56U, N65U, 68U, 86U都係無乜大分別。
1. 2.4G 都係死死吓。時得時唔得。
2. 68U及86U既5G 比N56U, N65U係好很少很少, 分別係收到訊號但用唔到, 而56U/65U幾乎無訊號。

68U及86U GUI行Javascript, 呢D死蠢既做法, 令其GUI反應比56U/65U仲慢。

56U/65U save settings, GUI快太多了。

[RCHK]

前排農曆新年假終於裝左AC86U來用, 感覺同AC68U無咩分別

https://www.snbforums.com/threads/ac68u ... ing.43055/" onclick="window.open(this.href);return false;
86U is better in 5G WiFi.

我轉角位既睡房, 實測同N56U, N65U, 68U, 86U都係無乜大分別。
1. 2.4G 都係死死吓。時得時唔得。
2. 68U及86U既5G 比N56U, N65U係好很少很少, 分別係收到訊號但用唔到, 而56U/65U幾乎無訊號。

68U及86U GUI行Javascript, 呢D死蠢既做法, 令其GUI反應比56U/65U仲慢。

56U/65U save settings, GUI快太多了。

攪 56U/65U 班俄仔唔做 66U/68U 等真係可惜

[andyyau]

前排農曆新年假終於裝左AC86U來用, 感覺同AC68U無咩分別

https://www.snbforums.com/threads/ac68u ... ing.43055/" onclick="window.open(this.href);return false;
86U is better in 5G WiFi.

我轉角位既睡房, 實測同N56U, N65U, 68U, 86U都係無乜大分別。
1. 2.4G 都係死死吓。時得時唔得。
2. 68U及86U既5G 比N56U, N65U係好很少很少, 分別係收到訊號但用唔到, 而56U/65U幾乎無訊號。

68U及86U GUI行Javascript, 呢D死蠢既做法, 令其GUI反應比56U/65U仲慢。

56U/65U save settings, GUI快太多了。

攪 56U/65U 班俄仔唔做 66U/68U 等真係可惜

班俄仔好很串的。係佢地個issue page內，有人建議佢地寫清楚每次update左乜，
同埋update係邊，佢地串到話你搵唔到就唔好用。其實update 既link真係係第2度。

而且版本編號一年多兩年都係一樣，改都唔改，其實係有update，不過唔知改左乜。
搵鬼敢update咩。

轉左呢兩隻新router, 點都無舊既咁順手。